A-4 Informational Notifications Instrument Notifications and Troubleshooting
A-10 PN: 10580-00444 Rev. U MS2090A UG
Presetting Instrument
In Toolbar, Not Logged, Transient
Rebooting Instrument
In Toolbar, Not Logged, Transient
Rebooting instrument into Recovery mode
In Toolbar, Not Logged, Transient
Recall initiated
When a file is selected for recall
Reset Completed
In Toolbar, Logged, Transient
Resetting Instrument
In Toolbar, Logged, Transient
Restoring calibration settings
In Toolbar, Not Logged, Transient
Recording In Progress
In Toolbar, Logged, Persistent
Recording Complete. File saved as <filename>
In Toolbar, Logged, Transient
Remove any RF input signal to the external sensor
Pop-up, Not Logged, Transient
RF Attenuation Auto must be OFF or Reference Level must be below -40dBm to enable PreAmp
In Toolbar, Logged, Transient
Successfully concatenated <N> files
When the concatenation of streaming metadata files is complete.
Successfully connected to access point
In Toolbar, Not Logged, Transient
Screenshot saved
When saving a screenshot is successful
Scale adjusted to accommodate user change
In Toolbar, Not logged, Transient
To Next Page
Loading...
