Section 5 Remote Control
5-16
*STB? (Read Status Byte Query)
Function
Outputs status byte register containing MSS bit.
Header Program command Query Response
*STB? --- *STB? n
Value of n
0 to 255
Example use
*STB?
Example response message
1
*TRG (Trigger Command)
Function
Same function as IEEE488.1 GET-Group Execute Trigger bus command. Executes
the START command on the MP8931A.
Header Program command Query Response
*TRG *TRG --- ---
Example use
*TRG
*TST? (Self Test Query)
Function
Executes self-test and outputs the results.
Header Program command Query Response
*TST? --- *TST? n
Value of n
0: No error
1: An error detected during self-test at startup
Example use
*TST?
Example response message
0
To Next Page
Loading...
