A3 PLUS - A5 - A6 PLUS - L6
SURGICAL SINGLE CART
Description of the instrument.
a Spout.
b Handle.
c Syringe release button.
d Air button.
e Water button.
f Hot/cold selector (only for 6-function syringes).
g Hot/cold indicator LED (only for 6-function syringes).
The instrument is supplied non-sterile.
It is recommended to use disposable infection control
sheaths and spouts.
Syringe models and operating times:
• syringe 3F: continuous operation,
• syringe 6F: 5 sec. operation, 10 sec. rest,
• syringe 6F (with fibre optics): 5 sec. operation, 10 sec. rest.
Use.
• Place the instrument in its work position.
Instrument activation is highlighted by the relevant managing
screen appearing on the DISPLAY.
Button (e) = water;
Button (d) = air;
Button (e + d) = spray.
6F syringe, operation with hot water, air and spray: turn the selector
switch (f) anti-clockwise (LED g on).
6F syringe, operation with cold water, air and spray: turn the selector
switch (f) clockwise (LED g off).
Removing the handle.
The spout (a) is screwed onto the handle (b).
Press the locking button (c) to take the handle off the syringe casing.
Carry out this operation with heater off.
Removable hose.
The instrument features a removable hose to make cleaning operations
easier (see paragraph 5.).
Cleaning.
Use soft disposable paper towel dampened with
detergents/disinfectants.
• Do not soak the syringe in liquid disinfectants or
detergents.
• Inadvisable products: abrasive products and/or products
containing acetone, chlorine and sodium hypochlorite.
Sterilization.
Syringe handle and spout: steam autoclave at up to
135°C following the instructions for use of the device.
To Next Page
Loading...
