Anthos A3 Plus - Push-Pedal Foot Control

A3 PLUS - A5 - A6 PLUS - L6
SURGICAL SINGLE CART
EN
37
5.2.2. "PUSH-PEDAL” FOOT CONTROL
Description of the parts.
1 Handle.
2 Control lever.
3 Dental chair movement control.
4 Chip-air/Patient rinse position recall control.
5 Water Clean System/Automatic dental chair return control.
6 Spray operation LED.
7 Battery charge LED (wireless version only).
Control lever (2).
With instrument removed
• Pushing the pedal (2) for a long time starts the instrument.
• Shifting the pedal (2) adjusts speed/power of the instrument:
- to the right: increase;
- to the left: decrease.
The control lever adjusts the speed/power of the instrument
from the minimum to the maximum value set from the
dentist's board.
Release the pedal (2) to stop instrument operation.
With the spray active, at the end of the operation a blast of air is
automatically activated to remove any residual drops of liquid in
the spray ducts.
• A short sound warns of the switching.
When the LED (6) is on, it indicates operation WITH
spray.
• When the pedal (2) is pressed, all automatic dental chair
movements are automatically blocked.