A3 PLUS - A5 - A6 PLUS - L6
SURGICAL SINGLE CART
When the peristaltic pump is enabled, the other sources of liquid supply are disabled
5.4.1. TURBINE (SINGLE WATER UNIT models)
The instrument is supplied NON-sterile.
Carefully read the operating instructions supplied with
the instrument before attempting to sterilize.
Operating times: work 5 min., rest 5 min.
f Cock that adjusts the amount of spray water
g Turbine return air filter.
It is not possible to adjust the amount of spray air.
• Place the instrument in its work position.
Instrument activation is highlighted by the relevant managing
screen appearing on the display.
• Use the foot control lever to start the instrument (see paragraph 5.2.).
The turbine hose can also be used to connect the air
micromotors equipped with 4-way connectors and conforming
with standard ISO 13294 and/or other air-operated
instruments with the same 4-way connector.
Adjusting the drill’s rotation speed:
• Set the percentage of drill’s maximum rotation speed by pressing
“increase” or “decrease“ buttons.
The data set are automatically saved.
Turning on the fibre optics.
• Place the instrument in its work position.
Fibre optics (if provided) are always on.
Activation/deactivation of independent water supply.
• Press button (T) to activate/deactivate the independent water supply:
Independent water supply active status is highlighted by icon
(A) appearing on the console display.
Cleaning and maintenance.
See paragraph 5.4.
Safety standards.
See paragraph 5.4.
To Next Page
Loading...
