Anthos A3 Plus - Water Unit LED Indicators

A3 PLUS - A5 - A6 PLUS - L6
SURGICAL SINGLE CART
90
EN
7.8. WATER UNIT LED (optional)
Fitted on models L6 only.
One or two LED rings (l) can be mounted on the water unit to
signal the operating status of the dental unit.
Warning colours are preset and cannot be changed by the
operator.
The basic colour (default: WHITE) can be set by the Technical
Service.
FUNCTION
DESCRIPTION
COLOUR
SCALER
NORMAL operating mode: steady LED light.
LIGHT BLUE
ENDO operating mode: steady LED light.
ORANGE
PARO operating mode: steady LED light.
GREEN
APEX LOCATOR
Depending on the measurement, the LED light gradually changes from GREEN to
YELLOW to RED.
GREEN
YELLOW
RED
BOWL
Bowl rinse phase: LED light flashing slowly.
Basic colour set.
CUP
Water-to-cup delivery phase: steady LED light.
LIGHT BLUE
DISINFECTION CYCLE
Dental unit in HYGIENE mode: steady LED light.
GREEN
Emptying and rinse phase: steady LED light.
LIGHT BLUE
Contact pause: steady LED light.
WHITE
STOPWATCH
LED ring slowly turns off as the seconds pass.
At the end of the time the LED ring flashes.
Basic colour set.
FLUSHING
Dental unit in HYGIENE mode: steady LED light.
GREEN
Rinse phase: steady LED light.
LIGHT BLUE
DENTAL CHAIR
Seat or backrest up movement: LED light moves clockwise.
Basic colour set.
Seat or backrest down movement: LED light moves anti-clockwise.
Basic colour set.
PATIENT SENSOR
Patient entry: one turn of LED light.
Basic colour set.
Patient exit: one turn of LED light.
Basic colour set.
SPRAY
MICROMOTOR-TURBINE
H
2
O spray only: LED half-ring steady on.
GREEN
Air spray only: LED half-ring steady on.
LIGHT BLUE
Aria + H
2
O spray: LED ring steady on with 2 different colours.
GREEN - LIGHT BLUE
Spray off: LED ring off
-
BASIC STATUS
Dental unit in stand-by: LED ring off.
-
Dental unit operating: LED ring steady on.
Basic colour set.