Anthos A3 Plus - ELECTRIC MICROMOTOR (SINGLE WATER UNIT Models)

A3 PLUS - A5 - A6 PLUS - L6
SURGICAL SINGLE CART
50
EN
5.5.3. ELECTRIC MICROMOTOR (SINGLE WATER UNIT models)
Use.
The instrument is supplied NON-sterile.
Carefully read the operating instructions supplied with
the instrument before attempting to sterilize.
Operating times: work 5 min., rest 5 min.
f Cock that adjusts the amount of spray water
It is not possible to adjust the amount of spray air.
• Place the instrument in its work position.
Instrument activation is highlighted by the relevant managing
screen appearing on the display.
• Use the foot control lever to start the instrument (see paragraph 5.2.).
Adjusting the drill’s rotation speed:
• Set the percentage of drill’s maximum rotation speed by pressing
“increase” or “decrease“ buttons.
The data set are automatically saved.
Turning on the fibre optics.
• Place the instrument in its work position.
Fibre optics (if provided) are always on.
Activation/deactivation of independent water supply.
• Press button (T) to activate/deactivate the independent water supply:
Independent water supply active status is highlighted by icon
(A) appearing on the console display.
Reversing micromotor drill rotation direction.
• Select micromotor drill rotation direction by pressing button (E):
The reversed rotation direction is signalled by a sound (3 BEEPS) and
by icon (B) appearance on the DISPLAY.
As soon as the micromotor is extracted, in addition to the
icon (B), a sound (3 BEEPS) warns the operator if the
direction of rotation is reversed.
When the rheostat lever is on, the micromotor drill cannot
reverse its direction of rotation.
Cleaning and maintenance.
See paragraph 5.5.
Safety standards.
See paragraph 5.5.