Anthos A3 Plus - Page 49

A3 PLUS - A5 - A6 PLUS - L6
SURGICAL SINGLE CART
EN
49
Drill rotation at maximum torque.
Select the drill rotation mode when the set maximum torque is reached:
S1 Rotation lock.
S2 Stop normal rotation and reverse rotation.
S3 Stop normal rotation, short reverse rotation and resumption of
normal rotation.
Certified contra angle pre-set list.
Display text
Ratio
Display torque
Torque tolerance to drill
Reference contra angles
128:1
128:1
100 %
±20%
All makes
120:1
120:1
100 %
±20%
All makes
64:1
64:1
100 %
±20%
All makes
40:1
40:1
100 %
±20%
All makes
18:1
18:1
100 %
±20%
All makes
16:1
16:1
5 Ncm
±20%
All makes
E16
16:1
5 Ncm
±10%
Goldspeed E16
®
EVO E16
16:1
5 Ncm
±10%
Goldspeed EVO E16
®
10:1
10:1
5 Ncm
±20%
All makes
ER10
10:1
5 Ncm
±10%
NSK ER10
®
9.5:1
9.5:1
5 Ncm
±20%
All makes
K8.1:1
8.1:1
5 Ncm
±10%
KaVo MASTERmatic M07 L
®
+ Testina L66B
®
S6:1
6:1
5 Ncm
±10%
Sirona Endo 6:1
K5.4:1
5.4:1
5 Ncm
±10%
Kavo IntraC 0767 LHC
®
EVO E4
4:1
5 Ncm
±10%
Goldspeed EVO E4®
4:1
4:1
5 Ncm
±20%
All makes
ER4
4:1
5 Ncm
±10%
NSK ER4
®
K3:1
3:1
5 Ncm
±10%
KaVo MASTERmatic M07 L
®
+ Testina L68B
®
K2.7:1
2.7:1
5 Ncm
±10%
Kavo LUX 7LP
®
Kavo IntraC 0768 LHC
®
WD-79M
2:1
5 Ncm
±10%
W&H WD-79M
®
W&H EB-79M
®
1:1
1:1
5 Ncm
±10%
All makes
Menu with micromotor extracted and active.
The following functions can be changed:
• adjust the maximum rotation speed of the drill by using the “increase”
or “decrease“ buttons (E).