HA-8180V 1-18
Chapter 1 Before Use
2 Unlock the nozzle drive unit.
a Open the front cover.
b Open the maintenance cover.
c Loosen the knurled screw by hand.
d Slide the fixing bracket to the right as viewed from the front of
the instrument and pull it to the front.
3 Unlock the sample tube spinning unit.
a Loosen one screw with the Phillips screwdriver and slide the
fixing bracket forward to remove it.
b Tighten the loosened screw.
c Close the maintenance cover, then the front cover.
a
b
d
c
Knurled screw
To Next Page
Loading...
