USER MANUAL
Ascom d83 DECT Handset Bluetooth Headset
Change the name of Bluetooth headset
The name, in the headset list, of the headset is the default name for the headset.
To change the name, do as follows:
1. On the handset enter the Connections menu and select Bluetooth → Headset.
2. Select a headset by pressing up or down on the navigation key.
3. Press the soft key More.
4. Select Edit name. Enter a name, see 2.5 Alphanumeric Keys, page 12.
A.2 Calling
Make a Call
Dial the number on the handset and press the soft key Call, or the Off-hook key. When “Transfer call
to phone?” is displayed press No or ignore the message to use the Bluetooth Headset. Press Yes to use
the handset.
Answer a Call
A ring signal sounds in both the selected Bluetooth headset and the handset to signal an incoming call.
To answer the call in the Bluetooth headset, press the button on the headset.
To answer the call in the handset press the Off-hook key on the handset.
End a Call
To end the call press the button on the headset or the On-hook key on the handset.
A.3 Volume and Mute Control
Adjust the Volume During a Call
Depending on the Bluetooth headset it might be possible to adjust the volume on the headset*. On the
handset press the upper Volume button on the upper left side to increase the volume and the lower
Volume button to decrease the volume in the headset.
Turn the Microphone On/Off During a Call
Mute the headset and the handset with the Sound off key on the handset. See 5.4.4 Turn the Microphone
On or Off during a Call, page 30.
A.4 Messaging
When a text message is received during an ongoing call, a beep sounds in the Bluetooth headset.
A.5 Transfer a call
Transfer a Call to the handset
To transfer a call to the handset from the Bluetooth headset, press the soft key More on the handset during
the call, and select Audio transfer.
TD 93434EN / 01 December 2021 / Ver. B 99
To Next Page
Loading...
Need help?
General
