ASCOM d83 - Settings

Menu Operation
USER MANUAL
Ascom d83 DECT Handset
Call Number in Text
This option is only visible if the number consists of a minimum of three digits.
1. Select View.
2. Do one of the following:
− Press More and select Call no. in text.
− Press
.
3. If the message contains several numbers, select the number to be called from the list.
4. Press Call or
.
Save Number
1. Select View → More → Save number.
2. Select Work number, Mobile number, or Other number.
3. Press Add.
4. Enter name for the contact.
5. Press OK.
6. Press Save to save the number in the contact list.
8.5.2 Write New Message
1. Select Write new message.
2. Enter text and press Send. See also 6 Messaging, page 36.
The message can be saved and sent later by pressing the soft key Back and selecting Yes. The
message is stored under Unsent messages. See 8.5.3 Unsent Messages, page 64.
3. Enter number or press the middle soft key to get a number from the contact list.
4. Press Send.
8.5.3 Unsent Messages
1. Select Unsent to view the list.
2. Select message to edit/send.
3. Select Edit, edit text and/or just select Send.
Delete Unsent Messages
1. Select More.
2. Select Delete or Delete all.
3. Select Yes if the unsent message shall be deleted.
8.5.4 Sent Messages
Select Sent to view the list, then View.
Forward message
1. Enter additional text if needed.
64 TD 93434EN / 01 December 2021 / Ver. B