USER MANUAL
Ascom d83 DECT Handset
System Handling
12 System Handling
12.1 Software Upgrade and Additional Features
Software and parameters in the handset can be upgraded by using the WinPDM/Device Manager. Refer to
the Installation and Operation Manual, Portable Device Manager (WinPDM), Windows Version,
TD 92325EN or the Installation and Operation Manual for the Device Manager.
Examples of additional features that can be downloaded/configured via WinPDM/Device Manager:
• Company phonebook
• Downloadable languages
• Customizing the Menu Tree
For more information, refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN.
To view the handset’s software version, enter *#34# in idle mode.
12.2 Handset Updates via Charging Rack
From time to time, users are instructed to leave their handsets in a central charging rack to allow the
handset to be updated with new features and functions. An ongoing update is indicated by the
in the
handset header bar and an Updating handset message is displayed in the active area.
During the update, a message is displayed to indicate that an update is in progress as shown in Figure 13.
Handset Update while in Charger, page 81. The OK soft key can be selected to close the message.
Figure 13. Handset Update while in Charger
If the handset removed from the charger and used, the update is suspended and resumed when it is
returned to the charger.
TD 93434EN / 01 December 2021 / Ver. B 81
To Next Page
Loading...
Need help?
General
