Menu Operation
USER MANUAL
Ascom d83 DECT Handset
2. Select Activate.
3. Enter number (maximum 24 digits) to divert to, or press
to access the phonebook.
4. Press OK.
The handset sends an absence reason code to the system by establishing a call. The call will automatically
be disconnected after a few seconds. The code is defined when configuring the diversion reason in the
handset. For more information, refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN
To stop diversion, select Internal → Deactivate or select External → Deactivate. In both cases, confirm by
pressing OK.
Divert Calls if No Reply
1. Select No reply.
2. Select Activate .
3. Enter number (maximum 24 digits) to divert to, or press
to access the phonebook.
4. Press OK.
The handset sends an absence reason code to the system by establishing a call. The call will automatically
be disconnected after a few seconds. The code is defined when configuring the diversion reason in the
handset. For more information, refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN
To stop diversion, select No reply → Deactivate and confirm by pressing OK.
Divert Calls When Busy
1. Select When busy.
2. Select Activate .
3. Enter number (maximum 24 digits) to divert to, or press
to access the phonebook.
4. Press OK.
The handset sends an absence reason code to the system by establishing a call. The call will automatically
be disconnected after a few seconds. The code is defined when configuring the diversion reason in the
handset. For more information, refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN
To stop diversion, select When busy → Deactivate and confirm by pressing OK.
8.3 Shortcuts
Predefined functions can be set as shortcuts for the Soft keys, Hot keys, Navigation keys and Multifunction
buttons. For example, a soft key can be set to make a call, as a shortcut to send a message or to a menu.
If creating a shortcut to the Phone call function, a variable or character U in the Enter number field can be
added that lets the user enter additional numerical characters before calling the number. See 9 Procedure
Call, page 77 for more information.
1. Enter the menu by pressing the Menu Soft key.
2. Select
in the menu, and press the Soft key Select.
8.3.1 Define Keys
Define Soft Keys
1. Select Soft keys.
60 TD 93434EN / 01 December 2021 / Ver. B
To Next Page
Loading...
Need help?
General
