ASCOM d83 - Time and Date Settings

Menu Operation
USER MANUAL
Ascom d83 DECT Handset
When the handset with the screen saver set to Information is in a charger, the Owner ID is
displayed even if the handset switched off. This simplifies identification when many handsets are
in a charging rack.
Brightness
1. Select Display from the handset menu.
2. Select Brightness.
3. Select one of the following options:
− Low
− Normal
− High
4. Press Back.
Rotate Display Text
1. Select Display from the handset menu.
2. Select Rotate display text.
3. Select Normal or Inverted.
4. Press Back.
Font Style
1. Select Display from the handset menu.
2. Select Font style.
3. Select Normal or Bold.
4. Press Back.
8.8.5 Time and Date Settings
The time and date displayed in the handset cannot be changed by the user. The DECT system is solely
responsible for keeping the time. The handset also synchronises with the DECT system time when:
• The handset is turned on after having been turned off. The handset requests the current DECT system
date and time.
• The handset remains on for longer than 24 hours. The handset requests the DECT system time every 24
hours from the time it was last turned on.
The time and date formats displayed in the handset can be changed by the user as described in the
following sections.
Set Time Format
1. Select Time & Date.
2. Press Select.
3. Select time format. The actual time format will be displayed. Selectable time formats:
− 12:00 (AM/PM)
− 24:00
4. Press Select to save the setting.
74
TD 93434EN / 01 December 2021 / Ver. B