Messaging
USER MANUAL
Ascom d83 DECT Handset
− Redisplay the message and terminate the call. See Redisplay the Message and Terminate the Call,
page 44.
Redisplay the Message and Continue with the Call
1. To redisplay the message while the call is ongoing, select the More soft key.
2. From the pop-up menu, select Messaging.
3. From the Messaging menu, select Inbox. The received message summary is displayed.
4. Press the View soft key to display the message in full. If required, use the four-way navigation key to
scroll up and down a long text message to reveal the content while reviewing and discussing the
message with the called party.
Redisplay the Message and Terminate the Call
Press
. The call is terminated and the ongoing call summary details are replaced by the redisplayed text
message.
6.12 Mobile Data
The support for this system dependent feature is dependent on handset model. For more
information, see 1.2 Functions and Accessories, page 1.
6.12.1 Send Mobile Data
User entered data can be sent from the handset by pressing a pre-programmed Hot key or Soft key, or
selecting a Service. Mobile data can be used for opening a door, starting/stopping a machine etc. The data
can either be predefined, or entered after the Hot key/Soft key is pressed or Service is selected.
The data can be predefined when programming the Soft/Hot key or Service, see Define Soft Keys, page 60,
Define Hot Keys, page 61 and 8.4.1 Add Services, page 62.
Send Mobile Data with a Prefix
Mobile data with a prefix is sent from the handset by entering data and then pressing a pre-programmed
Hot key or Soft key or select a Service. Mobile data with prefix can be used to send information to an
application in the system.
The prefix is predefined by the user when programming the Hot/Soft key or Service, see Define Soft Keys,
page 60 and Define Hot Keys, page 61.
6.13 Voicemail
This feature is only available if configured in the system.
6.13.1 Receive a Voicemail
When receiving a voicemail, the content of the voicemail notification is displayed automatically on the
screen, and is also indicated by the Voicemail message icon
in the status bar.
If the content of the notification is displayed, press Call to dial the voicemail. If Close is selected, the
voicemail can be dialled by a long press on digit key 1 in standby mode, or from the Inbox menu.
44
TD 93434EN / 01 December 2021 / Ver. B
To Next Page
Loading...
Need help?
General
