USER MANUAL
Ascom d83 DECT Handset
Menu Operation
Activate the Phone Lock
The phone lock settings are activated from the handset Settings menu in the following way:
1. Select Locks.
2. Select Phone lock.
3. Select Auto phone lock.
4. Select On or On in charger as required.
5. Enter PIN code.
6. Press OK.
7. Press the Back soft key twice to return to the Locks.
8. Select Auto lock time.
9. Select the required lock time.
If the PIN code has been forgotten, it can be removed by the handset distributor.
Deactivate the Phone Lock
From the handset Settings menu:
1. Select Locks.
2. Select Phone lock.
3. Select Auto phone lock.
4. Enter PIN code.
5. Press OK.
Change PIN Code
From the handset Settings menu:
1. Select Change PIN code.
2. Enter the old PIN code.
3. Press OK.
4. Enter new PIN code twice.
5. Press Save.
8.8.4 Display Settings
Screen Saver
The screen saver can be set to one of the following settings:
• Information: Displays status and identification information while the handset is idle.
• Black: The screen is black when the handset is idle.
• Black also in call: The screen is also black when the handset is in call.
To set the screen saver:
1. Select Display from the handset menu.
2. Select Screen saver. The current setting is displayed under Screen saver.
3. Select Information, Black, or Black also in call.
4. Press Back.
TD 93434EN / 01 December 2021 / Ver. B 73
To Next Page
Loading...
Need help?
General
