Basic Operation
USER MANUAL
Ascom d83 DECT Handset
When the keypad is Iocked, the volume buttons and the mute button can be pressed during the
call. Depending on handset model, the Alarm button can also be pressed. For information about
which functions are supported by existing handset models, see 1.2 Functions and Accessories,
page 1.
4.5 Lock and Unlock the Handset
The handset can be protected for unauthorized use. If this function is activated, a PIN code has to be
entered for example to switch on the handset, to answer an incoming call etc. The default phone lock code
(0000) can be changed to any 4ā8 digit personalized code.
If a phone is shared and one of the users logs off the shared phone, the lock that prevents the
handset from unauthorized use is deactivated. For additional information, see 4.2 Log a Shared
Phone On and Off, page 24.
If configured in the handset, a predefined emergency number can be called while the handset is
locked. Refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN. Depending
on handset model, the Alarm button can also be used. For information about which functions are
supported by existing handset models,, see 1.2 Functions and Accessories, page 1.
If a phone is shared using Device extension and the battery is replaced, the lock that prevents the
handset from unauthorized use is deactivated.
1. Press Menu.
2. Select Settings .
3. Select Locks ā Phone lock ā Auto phone lock.
4. Select On, On in charger, or Off.
4.6 Mute Handset on Incoming Call or Message
The handset can temporarily be muted on an incoming call or message. The call is not hung up when the
handset is muted. If the call is unanswered, it will revert to voicemail if the handset has been configured for
voicemail. To mute an incoming call or message, long press
or the mute button while the handset
sounds.
26 TD 93434EN / 01 December 2021 / Ver. B
To Next Page
Loading...
Need help?
General
