USER MANUAL
Ascom d83 DECT Handset
Menu Operation
8.7.1 Call Contact
1. Select Call contact.
2. Select contact from the list, or enter name or number in the search field.
3. Press the soft key Call.
A contact can be edited by selecting View → More.
Add New Contact
1. Select Add contact → New.
2. Select Add and enter the name of the contact.
3. Press OK.
4. Select Work number, Mobile number, or Other number.
5. Press Add.
6. Enter the number.
A variable or the character U can be added to the Work/Mobile/Other number field to allow the user to
enter additional numerical characters before calling the number. See9 Procedure Call, page 77 for
more information.
7. Press OK.
8. Press Save.
A specific ring signal can be set for each contact, see 8.7.4 Set Ring Signal for a Contact, page 68.
Add From Call List
1. Select Add contact → From call list.
2. Select number.
3. Press Add.
4. Select Work number, Mobile number, or Other number.
5. Press Add and enter the name for the contact.
6. Press OK.
7. Press Save.
A specific ring signal can be set for each contact, see 8.7.4 Set Ring Signal for a Contact, page 68.
8.7.2 Add Contact
Select Add contact.
Add New Contact
1. Select New.
2. Select Add, and enter the name of the contact.
3. Press OK.
4. Select Work number, Mobile number, or Other number.
5. Press Add.
TD 93434EN / 01 December 2021 / Ver. B 67
To Next Page
Loading...
Need help?
General
