USER MANUAL
Ascom d83 DECT Handset
Calling
• This function can also be activated by selecting another answering method, that is, "Automatically" and/
or "Loudspeaking". See 8.8.6 Answering, page 75.
5.4.20 Call Diversion
All calls, internal calls, external calls, calls when busy, or calls at no answer can be diverted to another
handset number. The diversion is made via the Calls menu → Call services → Divert calls. See Divert Calls,
page 59.
In addition, an absence reason (for example “Lunch”, “Meeting”, “Trip” etc.) can also be set, The absence
reason is set via the Calls menu → Call services → Absence. See 8.2.8 Call Services, page 59.
PBX settings for the call diversion must be set in order to show the Divert calls menu in the
handset. Refer to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN.
If both diversion and absence reason are set, the absence reason is used.
Multifunction buttons, Soft key or Hot key can be pre-programmed with a shortcut to the diversion function
or the absence reason/menu. See 8.3 Shortcuts, page 60.
5.4.21 Emergency Calls
If configured in the WinPDM/Device Manager, any one of up to five emergency numbers can be called. An
emergency number can be called even if the handset or keypad has been locked. For additional
information, see sections 8.8.2 Keypad Lock Settings, page 71 and 8.8.3 Phone Lock Settings, page 72.
TD 93434EN / 01 December 2021 / Ver. B 35
To Next Page
Loading...
