Advanced Functions
USER MANUAL
Ascom d83 DECT Handset
11 Advanced Functions
11.1 Admin Menu
The handset has a hidden menu for system administrators. Refer to the Configuration Manual, Ascom d83
DECT Handset, TD 93426EN.
The Admin menu contains:
• Software and hardware information, IPEI/IPDI, and User ID
• DECT link system information
• Fault logging
• Location information
The support for this feature is dependent on handset model. For more information, see 1.2
Functions and Accessories, page 1.
• Centralized Management status
• Site survey tool
• Enhanced system menu with ability to alter protection
• Frequency band selection
3
• Factory reset option
For quick access to the Device Information (DI) menu in idle mode, press the keys containing *#DI# (that is
*#34# ). To view the IPEI/IPDI directly, press *#06#. See the table below.
Information Code
Software version *#34#
Hardware version *#34#
IPEI/IPDI *#34# or *#06#
User ID *#34#
11.2 Clear Lists in Charger
A parameter can be set via the WinPDM/Device Manager to clear message and call lists stored in the
handset. When the parameter is activated and the function has been downloaded to the handset, the lists
are deleted when the handset is placed in a charger. This can be useful during administration of handsets
for new users. Refer also to the Configuration Manual, Ascom d83 DECT Handset, TD 93426EN.
80 TD 93434EN / 01 December 2021 / Ver. B
3. This option will be hidden when the frequency band has been set.
To Next Page
Loading...
