Calling
USER MANUAL
Ascom d83 DECT Handset
This option is only visible if configured in the handset. For more information, refer to the Configura-
tion Manual, Ascom d83 DECT Handset, TD 93426EN.
1. Press the More soft key during the call.
2. Select End Call.
3. Press Select. This will end the current call and the previous call is resumed.
5.4.10 Transfer a Call
Prerequisite, a new call has been started during conversation, see 5.4.7 Start a New Call during Conversa-
tion, page 31.
This option is only visible if configured in the handset. For more information, refer to the Configura-
tion Manual, Ascom d83 DECT Handset, TD 93426EN.
When a caller has two ongoing calls, he/she can transfer the first call to the second call.
1. Press the More soft key.
2. Select Transfer.
3. Press Select. This connects the first call with the second call. Your call is automatically disconnected.
5.4.11 Transfer to New Call
An ongoing call can be transferred to a new number. When the new call is established, the caller that
initiated the transfer will be disconnected.
This option is only visible when the parameters "New call" and "Transfer" are defined in the
handset. For more information, refer to the Configuration Manual, Ascom d83 DECT Handset,
TD 93426EN.
1. Press the More soft key during the call.
2. Select Transfer to new call.
3. Press Select.
4. Enter number to the person the ongoing call shall be transferred to, or press
to access the
phonebook.
5. Press
to transfer the call. Your call is disconnected automatically.
5.4.12 Conference Call
Prerequisite, a new call has been started during conversation, see 5.4.7 Start a New Call during Conversa-
tion, page 31.
This option is only visible if configured in the handset. For more information, refer to the Configura-
tion Manual, Ascom d83 DECT Handset, TD 93426EN.
By initiating a conference call, an conversation can be made between several participants simultaneously.
1. Press the More soft key.
2. Select Conference call.
3. Press Select.
32 TD 93434EN / 01 December 2021 / Ver. B