Menu Operation
USER MANUAL
Ascom d83 DECT Handset
6. Enter the numbers.
A variable or the character U can be added to the Work/Mobile/Other number field to allow the user to
enter additional numerical characters before calling the number. See 9 Procedure Call, page 77 for
more information.
7. Press OK.
8. Press Save .
A specific ring signal can be set for each contact, see 8.7.4 Set Ring Signal for a Contact, page 68.
Add from Call List
1. Select From call list.
2. Select number.
3. Press Add.
4. Select Work number, Mobile number, or Other number.
5. Press Select.
6. Select Add, and enter the name of the contact.
7. Press OK.
8. Press Save.
A specific ring signal can be set for each contact, see 8.7.4 Set Ring Signal for a Contact, page 68.
8.7.3 Edit and Delete Contact
Edit Contact
1. Select Edit contact.
2. Select contact, and press Edit twice.
3. Enter new name or number
A variable or the character U can be added to the Work/Mobile/Other number field to allow the user to
enter additional numerical characters before calling the number. See9 Procedure Call, page 77 for
more information.
4. Press OK.
5. Press Save.
Delete Contact
1. Select Delete contact.
2. Select contact.
3. Press Delete.
4. Press Yes to confirm.
8.7.4 Set Ring Signal for a Contact
A specific ring signal can be set for each contact.
1. Add/edit a contact according to 8.7.2 Add Contact, page 67 or 8.7.3 Edit and Delete Contact, page 68.
68 TD 93434EN / 01 December 2021 / Ver. B
To Next Page
Loading...
Need help?
General
