Menu Operation
USER MANUAL
Ascom d83 DECT Handset
1. Select Multifunc. button 2.
2. Select Long press, or Multi press.
3. Select Function, and press Select to select function.
4. Select function from list, and press Select and then press Back.
5. Select Control question, and press Select. It is off by default.
6. Press Save.
8.4 Services
The Services menu lets the user create a submenu of frequently used functions. For example, "Write new
message", "Central phonebook", "Call contact", etc.
Tip: If configuring the Phone call function, a variable or character U in the Enter number field can be added
that lets the user enter additional numerical characters before calling the number. See 9 Procedure Call,
page 77 for more information.
1. Enter the menu by pressing the Menu Soft key.
2. Select
in the menu, and press the Soft key Select.
8.4.1 Add Services
1. Select Add new from the menu.
2. Choose an appropriate name for the service and enter the name in the Name field.
3. Press OK. The Function menu is displayed.
4. To navigate to the required function, press up and down on the navigation key.
5. Press Select.
6. If necessary, enter values in the fields (only applicable for some of the functions).
7. Press Back.
8.4.2 Edit Services
1. Mark a service by pressing up and down on the navigation key.
2. Press More.
3. Select Edit.
4. Edit the service parameters.
5. When done, press Back to apply changes.
8.4.3 Delete Services
1. Mark a service by pressing up and down on the navigation key.
2. Press More.
3. Mark Delete by pressing down on the navigation key.
4. Press Select.
5. Press Yes to delete the service.
62 TD 93434EN / 01 December 2021 / Ver. B
To Next Page
Loading...
Need help?
General
