USER MANUAL
Ascom d83 DECT Handset Bluetooth Headset
Pairing fails Headset is not in pairing mode Turn headset into pairing/
discoverable mode
Incorrect PIN entered Try again and enter correct PIN
Connecting fails/Failed to
connect headset
Headset is not turned on Turn on headset
Headset is out of range Move headset closer to handset
Link key in headset has been
deleted
Repeat pairing procedure
Headset is already connected to
another handset
Disconnect headset from the
other handset
Too close to disturbing devices. Disturbing devices can be WLAN
equipment, microwave etc.
Headset can not connect to
handset (refer to the headset
manual for details on how to
connect)
Handset is not turned on Turn on handset
Handset is out of range Move handset closer to headset
Bluetooth module is disabled Enable Bluetooth in Bluetooth
menu
Another headset is already
connected to the handset
Disconnect the connected
headset
Link key is missing in either
headset or handset.
Repeat pairing procedure
Too close to disturbing devices. Disturbing devices can be WLAN
equipment, microwave etc.
For more information, refer to the Manual for the Bluetooth headset.
TD 93434EN / 01 December 2021 / Ver. B 101
To Next Page
Loading...
Need help?
General
