Descriptions
USER MANUAL
Ascom d83 DECT Handset
• Hinge-type clip (standard)
The clip on the back of the handset is used to fasten the handset to a belt or similar. A swivel-type clip
may also be used.
• Swivel-type clip
The ordinary belt clip can be replaced with a special swivel-type belt clip adapted to firmly place your
handset onto your belt.
The handset can also be used without any clip on.
Security Cord
The security cord is 800 mm long. The security cord is attached directly to the handset.
Pull Cord
The pull cord is 800 mm long. The pull cord is attached directly to the handset’s pull cord connector on the
upper right side.
Carrying case
The carrying case is especially designed for the handset. The carrying case comes with a swivel type belt
clip and the handset is fully operational while placed in the carrying case.
Headset
A headset is recommended if the handset is frequently used, and/or the user want to have both hands free.
The headset comes in two versions: microphone integrated in the cable and microphone on a boom.
The headset button is always functional even when the keypad lock is activated.
In order to achieve optimal audio quality with the different headset types it is recommended to select the
corresponding headset profile. See 8.1.2 Headset, page 51 for more information.
14
TD 93434EN / 01 December 2021 / Ver. B
To Next Page
Loading...
Need help?
General
