ashtech DG16 - Page 204

184 DG14 and DG16 Board & Sensor Reference Manual
Measurement
Data
$PASHS,RAW,MBN Enable/disable raw measurement data
messages with Ashtech type 2 data
structure
196
$PASHQ,MBN Query raw measurement data messages
with Ashtech type 2 data structure
196
$PASHS,RAW,MCA Enable/disable raw measurements data
(MCA)
197
$PASHQ,MCA Query raw measurements data (MCA) 197
Position Data
$PASHS,RAW,GGB Enable/disable position data (GGB) 194
$PASHQ,GGB Query GGB position data 194
$PASHS,RAW,PBN Enable/disable raw position data (PBEN) 211
$PASHQ,PBN Query raw position data (PBEN) 211
$PASHQ,XYZ Query the 3-D satellite positions for
tracked satellites
221
Raw Data
Parameters
$PASHS,RAW,CMB Enable the Channel Measure Block 187
$PASHQ,CMB Query the Channel Measure Block 187
$PASHS,ELM Set raw data output elevation mask 5° 194
$PASHS,MSV Set minimum number of satellites 3 210
$PASHS,RCI Set recording interval 1 213
$PASHS,SIT Set site name ???? 217
Combined Raw
Data
$PASHS,RAW,CT1 Enable/disable combined raw data in the
CT1 Format data structure
188
$PASHQ,CT1 Query combined raw data in the CT1
Format data structure
188
$PASHS,RAW,CT2 Enable/disable combined raw data in the
CT2 Format data structure
190
$PASHQ,CT2 Query combined raw data in the CT2
Format data structure
190
$PASHS,RAW,CT3 Enable/disable combined raw data in the
CT3 Format data structure
192
$PASHQ,CT3 Query combined raw data in the CT3
Format data structure
192
Table 7.1. Raw Data Commands (Continued)
Function Command Description Default Page