Getting Started 21
This chapter is intended to get you started using the DG16 receiver. Please see
the chapters on General Information, Basic Operation, Differential Operation, and
Command/Response Formats for specific details regarding performance, power
requirements, and commands.
This chapter discusses the following topics:
• Connecting the DG16 to power and the antenna
• Default parameters
• Communicating with the DG16 using standard communications software
• Sending common commands to the DG16
If you use equipment other than Thales Navigation-supplied with the DG-16, it
must comply with hardware specifications as described in the “Hardware
Description” on page 4.
To Next Page
Loading...