EFD1000 E5 Dual Electronic Flight Instrument (EFI) Install Manual
DOCUMENT # 900-00041-001 PAGE 140-226 REVISION D
© Copyright 2019 Aspen Avionics Inc.
10.4.6.2 Installation Menu Page – IAS CONFIG B
Set Speed Bands per Aircraft Flight Manual. Note- Vne is set on previous page.
INSTALLATION MENU PAGE – IAS CONFIG B
10.4.6.3 Installation Menu Page – IAS CONFIG C
Set Speed Markers per Aircraft Flight Manual.
INSTALLATION MENU PAGE – IAS CONFIG C
10.4.6.4 Installation Menu Page – IAS CONFIG D
NOTE: These selections are rotorcraft only and are grayed out.
Does not apply to EFD1000 E5
10.4.6.5 Installation Menu Page – IAS CONFIG E
This menu is used to select the color of the airspeed tape speed bands so that they
can exactly match the existing airspeed indicator.
SPD Band 2
- Maximum structural cruising speed (Vno) to the never exceed speed
(Vne). Yellow is the default for piston engine aircraft. Set as required to match existing
IAS indicator.
SPD Band 3
- No flap stall speed (Vs) to the maximum structural cruising speed (Vno).
Green is the default for piston engine aircraft. Set as required to match existing IAS
indicator.
SPD Band 4
- Full flap stall speed (Vso) to the maximum flap extend speed (Vfe). White
is the default for piston engine aircraft. Set as required to match existing IAS
indicator.
To Next Page
Loading...
