EFD1000 E5 Dual Electronic Flight Instrument (EFI) Install Manual
DOCUMENT # 900-00041-001 PAGE 22-226 REVISION D
© Copyright 2019 Aspen Avionics Inc.
1.10.3 Software Certification
The EFD1000 E5 system software is approved using system level verification to approve
software and show compliance to 23.1309 (and 23.1301) in lieu of RTCA/DO-178/C, in
accordance with a Project-Specific Policy Statement dated June 13, 2018.
1.10.4 Environmental Compliance
All system components meet the environmental test requirements defined in RTCA/DO-
160E as shown in the environmental qualification forms in Section 13.
1.10.5 Installation Approval
Installation of the EFD1000 E5 is FAA approved under AML STC SA10822SC. This
installation manual contains FAA Approved Data, but only when used to install the Aspen
Avionics EFD1000 E5 display system in accordance with this AML STC. The data in this
manual may be used only by those authorized to install the EFD1000 E5 in writing, and
then only to support installation of the EFD1000 E5, either under STC SA10822SC, or
(when FAA-authorized) as a follow-on field approval for aircraft not included in the
Approved Model List. Use of this data for any other purpose requires separate written
approval from Aspen Avionics Inc.
1.11 Field Replaceable Parts
Refer to Appendix D of this manual and the ICA for a list of field replaceable parts.
1.12 Reserved
To Next Page
Loading...
