6. Device installation and start-up
User Manual – PhysioGo.Lite Electro page 28 / 96
6.3.5.2 Date of inspection
There is possibility to enter into the device the date of the next inspection – it will automatically remind you
about the need to perform an annual technical inspection.
6.3.5.3 Electrodes test
This function allows the user to quickly check the usage status of electrodes applied in electrotherapy treatments.
It can also be successfully used to assess the continuity of patient’s cables.
In order to exercise the option, follow the instructions shown on the display. Detailed description of the function
is described in the chapters 10.4 and 10.5.
6.3.6 Information
6.3.6.1 Info
Provides information about the serial number, version of the unit, software, interface and software build date.
6.3.6.2 Manufacturer
Provides information about the manufacturer together with the contact details.
6.3.6.3 Distributor
Provides information about the distributor in a given country together with the contact details. The „Change
contact data” button can be use only by authorized unit, after entering the access code. The full data consists of:
• the company name
• the company address
• the company website
• the company phone number
• the company e-mail
If data is not entered, the „-----” characters will be shown.
6.3.6.4 Technical support
Provides information about technical staff (the manufacturer’s or distributor’s) in a given country together with
the contact details. The „Change contact data” button can be use only by authorized unit, after entering the
access code. The full data consists of:
• the company name
• the company address
• the company website
• the company phone number
• the company e-mail
If data is not entered, the „-----” characters will be shown.
The „Show logs” button supports service diagnostics, by displaying information about all saved device errors.
6.3.6.5 Unit statistics
Provides information about the number of treatment procedures performed. Statistics can be deleted. If you
want to delete statistics, press Delete programs counters button.
To Next Page
Loading...
