Astar PhysioGo.Lite Electro - Ultra Reiz Current (Träbert S Current )

8. Definitions and parameters
page 55 / 96 Issue date 18.05.2021, rev. 1.0
Ultra Reiz current (Träbert’s current)
The Ultra Reiz current (Träbert’s current) is a special case of rectangular pulse current. This is a current with
rectangular shape, pulse duration 2 ms and pause duration 5 ms. These settings are not adjustable. Ultra Reiz
current is used in segmentary and local applications.
Parameters description:
Symbol Description
Symbol on
the treatment
screen
Available parameters
Treatment time - 1 – 60 minutes, 1 minute step
Shape of the
current
-
Rectangular pulse current according to
Träbert (Ultra Reiz)
Continuous or
interrupted
shape of the
current
c_shape
Continuous
• Pulse frequency is 4 kHz
• Duty factor 80%
• Pulse frequency is 8 kHz
• Duty factor 90%
Pulse duration - Constant 2 ms
Pause duration - Constant, 5 ms
Basic pulse
frequency
- Constant, 143 Hz
Training
program
PT
No training program, non-editable
parameter
Polarization
NOR
For such polarization setting red plug is a
positive electrode, and black plug is a
negative electrode.
REV
For such polarization setting red plug is a
negative electrode and black plug is a
positive electrode. Warning means that such
a setting is the reverse of commonly
accepted way of marking polarity.
ALT
Automatic polarization switch in the half
performed treatment.
Amplifier
operation
mode
-
CC – stabilized output current
CV – stabilized output voltage
Maximum
amplitude
-
0,3 – 140 mA in CC mode
Regulation step:
• 0,1 mA in the range of 0,3-10 mA
• 0,5 mA in the range of 10-140 mA
1,5 – 100 V in CV mode, max. 80 mA
Regulation step:
• 0,5 V in the range of 1,5-100 V