EasyManua.ls Logo

Astar PhysioGo.Lite Electro - Introduction; Manufacturer; Risk Management Process

Astar PhysioGo.Lite Electro
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1. Basic information and contents
User ManualPhysioGo.Lite Electro page 6 / 96
1. Introduction
Read this manual carefully before starting the unit operation! Follow the recommendations
presented in this manual!
The electrotherapy unit PhysioGo.Lite Electro should be installed by the seller.
The recipient has the right to insist on the product operation training.
The unit may only be operated by qualified personnel or under supervision of such personnel!
WARNING: The device is intended for adult patients only. It is not intended for use in a home healthcare
environment.
Description of symbols used in this manual:
Read appropriate passage of this user manual, warnings or important information. Failure
to observe warnings can lead to injuries.
Important notices and information.
Following texts marked with this symbol facilitates device operation.
NOTE:
The outlook of screens shown in this manual may slightly differ from their actual outlook during device operation.
These differences may concern size and type of fonts and size of symbols. There are no differences in the content
of shown information.
NOTE:
This manual contains information for use and technical description.
WARNING: No modification of this equipment is allowed!
Manufacturer
ASTAR Sp. z o.o.
ul. Świt 33
43-382 Bielsko-Biała, Poland
www.astar.eu
Risk management process
The manufacturer conducts continuous risk management process referring to the device construction, its
intended use, method of operation and maintenance. Residual risks are presented in this User Manual in form
of information about precautions, contraindications and warnings.

Table of Contents

Related product manuals