Astar PhysioGo.Lite Electro - Ig Pulses

8. Definitions and parameters
page 65 / 96 Issue date 18.05.2021, rev. 1.0
Symbol Description
Symbol on
the treatment
screen
Available parameters
Frequency rise time 12 s
Frequency fall time 12 s
Maximum
amplitude
-
0 – 1000 µA in CC mode
Regulation step:
• 50 µA within the range
IG pulses
IG pulses are triangular unipolar or bipolar pulse currents. Depending on the type used, the IG current has an
analgesic effect, improves circulation or reduces muscle tension.
Parameters description:
Symbol Description
Symbol on
the treatment
screen
Available parameters
Treatment time - 1 – 60 minutes, 1 minute step
Shape of the
current
IG30-UNI
IG 30 unipolar
IG30-BI
IG 30 bipolar
IG50-UNI IG 50 unipolar
IG50-BI IG 50 bipolar
IG100-UNI IG 100 unipolar
IG100-BI
IG 100 bipolar
IG150-UNI
IG 150 unipolar
IG150-BI IG 150 bipolar
Polarization
NOR
For such polarization setting red plug is a
positive electrode, and black plug is a
negative electrode.
REV
For such polarization setting red plug is a
negative electrode and black plug is a
positive electrode. Warning means that
such a setting is the reverse of commonly
accepted way of marking polarity.
ALT
Automatic polarization switch in the half
performed treatment.
Amplifier
operation mode
-
CC – stabilized output current
CV – stabilized output voltage
Basic pulse
frequency
f
Constant:
• 8,33 Hz – IG30-UNI
• 6,25 Hz – IG30-BI
• 185 Hz – IG50-UNI, IG100-UNI, IG150-UNI
• 172 Hz – IG50-BI, IG100-BI, IG150-BI