Astar PhysioGo.Lite Electro - User Sequences

7. Unit operation
page 39 / 96 Issue date 18.05.2021, rev. 1.0
Removal of user program:
Step Description
1. Prepare the unit to work in the program mode (see section 7.5).
2.
Select the option User programs from Program modes menu. Confirm your choice by pressing the
selected field again.
3.
Select the program which will be deleted.
4.
Press the button from main menu.
5.
Select the action – Remove.
6.
Confirm by pressing or resign using .
User program parameter view:
Step Description
1.
Prepare the unit to work in the program mode (see section 7.5).
2.
Select the option User programs from Program modes menu. Confirm your choice by pressing the
selected field again.
3. Select the program which parameters will be checked.
4.
Press button .
5.
Press the button , to return to the user-defined treatment program list.
User sequences
The unit is equipped with an advanced editor which allows you to create electrotherapy treatment sequences.
A single sequence may consist of up to four stages. The sequence may be created from previously saved user-
defined programs.
The user sequences are selected in the same way as preset treatment programs. In Program modes menu select
the option User sequences.
Step Description
1.
Connect patient’s cables.
2.
Switch the unit on.
3.
Select the tab 1 or 2 depending on needs or availability. Select the therapy
4.
Press the filed
Program mode
5.
Select the option
User sequences
from
Program modes
menu. Confirm by pressing the selected
field once again.
6.
Select the sequence from the list.
7.
Prepare the patient for the treatment according to indications in point 7.1
8.
Press the key
9.
Select the amplitude control mode.
Automatic mode
Semi-automatic mode
The sequence is performed continuously.
Between the steps, the current or voltage
amplitude is reduced to the safe level. Therefore,
there is a need for its upregulation in order to
ensure the proper feelings of the patient.
The sequence is performed continuously.
Between the steps, the current or voltage
amplitude is reduced to the minimum level.
Therefore, there is a need for its upregulation in
order to ensure the proper feelings of the
patient.