Astar PhysioGo.Lite Electro - Page 40

7. Unit operation
User Manual – PhysioGo.Lite Electro page 40 / 96
Step Description
10.
If it is necessary, during treatment procedure, using the keys set the amplitude.
If it is necessary to interrupt the treatment procedure (pause), press the key
. To resume the treatment
procedure, it is recommended to follow the instructions shown on the display.
Creation of user sequence:
Step Description
1.
Prepare the unit to work in the program mode (see section 7.5).
2.
Select the option User sequences from Program modes menu. Confirm by pressing the selected
field once again.
3.
Press the button from main menu.
This opens the user’s sequence editor.
Select the item to be saved. Press
4.
From the list of user programs, select the
program and press
Repeat the action for additional items.
The sequence may consist of up to 4
programs.
5.
Use the sequence edition tools described below to make changes in the created sequence.
6.
Press the button to save the sequence. Enter the name. Then press
7.
Press the button to escape from the sequence editor.