Ch. 10. Environmental Scanner Overview Sec. 10.1. Parts list
Itm Part # Item Description Qty Picture
18 114.576
Stage locking screw with
integrated ball end . Spare
screws used to lock down the
sample stage.
Step 8 on
page 170
. Be careful, these are
very expensive screws.
2
19
2-56 x
0.125
SHCS SS
2-56 x 1/8” long screws. Spare
screws used to lock down the
cell chamber body. See
Step 2
on page 166
.
12
20
00-90 x
1/8” Pan
Head SS
00-90 x 1/8” screw. Spare
screws used to fasten the sample
stage membrane to the cell body.
See
Step 4 on page 160.
12
21 230.040
FKM O-ring, 1.5mm x 0.5mm,
75A Durometer. Used to seal the
1/16” gas ports on the side of the
cell body. Custom size, only
available from Asylum
Research. Equivalent FFKM
part is 230.051. See Step 3 on
page 168.
10
22 230.039
FKM O-ring, 1.5mm x 0.7mm,
75A Durometer. Used to seal the
cantilever clip. Custom size,
only available from Asylum
Research. Equivalent FFKM
part is 230.050.
8
23 114.738
Modified (shortened) Flat Head
Phillips M2 screw, Stainless
steel. Spare screws to hold down
the cantilever clip.
3
photo needs update!
The scale in the photos is in cm and mm.
DRAFT
Page 118
To Next Page
Loading...