Maintenance, 10h
4812160101_A.pdf 2014-07-04
Air circulation - Check
Fig. Engine hood
1. Hood lock
2. Protective grille
1
2
Ensure that the engine has free circulation of cooling
air through the protective grille in the hood.
To open the engine hood, turn the lock handle (1)
upward. Raise the hood to its fully open position,
checking that the red safety catch on the left gas
spring is latched.
If the gas-springs for the hood are loosend and the
hood is raised to its upper position - block the
hood so that it cannot fall.
If the gas-springs for the hood are loosend and the
hood is raised to its upper position - block the
hood so that it cannot fall.
Coolant level - Check
Fig. Expansion tank
1. Filler cap
2. Sight glass
1
2
Place the roller on a flat surface and check the level of
the coolant in the sight glass (2). Top up with coolant if
the level is too low.
Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles.
Take great caution if the radiator cap must be
opened while the engine is hot. Wear protective
gloves and goggles.
Fill with a mixture of 50% water and 50% anti freeze.
See the lubrication specifications in these instructions
and in the engine manual.
Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed.
Flush the system every other year and change
the coolant. Make sure also that the air flow
through the cooler is unobstructed.
104
To Next Page
Loading...
Need help?
General
