Machine description
4812160101_A.pdf2014-07-04
Function descriptions
No Designation Symbol FunctionNo Designation Symbol Function
1 Ignition key The electric circuit is broken.1 Ignition key The electric circuit is broken.
All instruments and electric controls are supplied with
power.
All instruments and electric controls are supplied with
power.
Starter motor activation.Starter motor activation.
To start: Turn ignition key to the right until the
display LIGHTS UP, and wait until the displayed
roller GOES OFF and changes to the status image.
To start: Turn ignition key to the right until the
display LIGHTS UP, and wait until the displayed
roller GOES OFF and changes to the status image.
2 Forward/Reverse lever NB! When starting the machine, the lever must be in
neutral. The engine cannot be started if the
forward/reverse lever is in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is moved
forward, the roller moves forward; when the lever is
move backward, the roller moves backward.
The roller's speed is proportional to the distance the
lever is from the neutral position. The further the lever
is from the neutral position, the higher the speed.
2 Forward/Reverse lever NB! When starting the machine, the lever must be in
neutral. The engine cannot be started if the
forward/reverse lever is in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is moved
forward, the roller moves forward; when the lever is
move backward, the roller moves backward.
The roller's speed is proportional to the distance the
lever is from the neutral position. The further the lever
is from the neutral position, the higher the speed.
3 N/A3 N/A
4 Vibration on/off First push will start vibrations, second push will stop
vibrations.
4 Vibration on/off First push will start vibrations, second push will stop
vibrations.
5 N/A5 N/A
6 N/A6 N/A
7 Central warning indication General fault indication. See the display (33) for
description of the fault.
For detailed information about the fault indication, see
the table "Warning indication - membrane panel".
7 Central warning indication General fault indication. See the display (33) for
description of the fault.
For detailed information about the fault indication, see
the table "Warning indication - membrane panel".
Warning lights yellow - "less serious fault" or "DPF
regeneration info"
Warning lights yellow - "less serious fault" or "DPF
regeneration info"
Warning lights red - "serious fault"Warning lights red - "serious fault"
8 Direction indicator (Optional) Shows direction indicators activated (Activated via the
steering column switch).
8 Direction indicator (Optional) Shows direction indicators activated (Activated via the
steering column switch).
9 Main beam indicator (Optional) Shows main beam activated (Activated via the steering
column switch).
9 Main beam indicator (Optional) Shows main beam activated (Activated via the steering
column switch).
10 N/A10 N/A
11 Auto traction control, TC
(Anti-spin)
If the machine is equipped with TC (Anti-spin), this is
activated when starting up. (TC can be disengaged)
The speed limiter (23) is used to set the maximum
speed at full deflection of the forward/reverse lever.
11 Auto traction control, TC
(Anti-spin)
If the machine is equipped with TC (Anti-spin), this is
activated when starting up. (TC can be disengaged)
The speed limiter (23) is used to set the maximum
speed at full deflection of the forward/reverse lever.
12 N/A12 N/A
13 N/A13 N/A
14 Working mode / Transport mode Activates working mode, which makes it possible to
use vibration and lower the strike-off blade (optional).
The roller always starts in transport mode.
14 Working mode / Transport mode Activates working mode, which makes it possible to
use vibration and lower the strike-off blade (optional).
The roller always starts in transport mode.
15 Reserve15 Reserve
33
To Next Page
Loading...
Need help?
General
