Machine description
4812160101_A.pdf 2014-07-04
The speed of the machine is proportional to the angle
of the control lever (the deflection of the
forward/reverse lever regulates the speed). An
optional anti-spin system is available.
Brake system
The brake system comprises a service brake,
secondary brake and parking brake. The service brake
system produces retardation of the propulsion system,
i.e. hydrostatic braking.
Secondary/Parking brake
The secondary and parking brake system comprises
sprung disc brakes on the rear axle and the drum gear
which are disengaged by hydraulic pressure.
Steering system
The steering system is a load-sensing hydrostatic
system. The control valve on the steering column
distributes the flow to the steering cylinders at the
articulated joint. The steering angle is proportional to
the amount the steering wheel is turned.
On certain markets, the machine is also equipped with
an emergency steering system.
Vibration system
The vibration system is a hydrostatic system in which
a hydraulic motor drives the eccentric shaft, which
generates the drum's vibrations.
High amplitude or low amplitude are determined by the
hydraulic motor's direction of rotation. System for
variable amplitude is as standard.
Cab
The cab has a heating and ventilation system, with
defrosters for all windows. Air conditioning is available
as an accessory.
Emergency exit
The cab has two emergency exits: the door and the
rear cab window, which can be broken with the
emergency hammer located in the cab.
FOPS and ROPS
FOPS is the abbreviation for "Falling Object Protective
Structure" (roof protection) and ROPS is the
abbreviation for "Roll Over Protective Structure".
The cab is approved as a protective cab in accordance
with the FOPS and ROPS standards.
If any part of the cab's or the FOPS/ROPS structure's
24
To Next Page
Loading...
Need help?
General
