Attila DIGITAL - Identification and Description; Equipment Identification

ATTILA
EN
10
3. IDENTIFICATION AND DESCRIPTION
3.1. EQUIPMENT IDENTIFICATION
The nameplate is on the rear of the equipment. Contains:
▪ Serial number
▪ The type/functional features
▪ The details of the certification and marking.
Do not remove the identication plate and/or replace it with other plates.
Contact the manufacturer if required.
Cod:
xxxxxx
Illuminazione
Lighting
Resist. condensa
Condensation heater
Corrente
Rated current
Volume netto
Net volume
Potenza elettrica
Electric power
ARM
Sbrinamento elettrico
Electric defrost
The nameplate may change depending on the country of destination of the equipment.