Attila DIGITAL - Adjusting Operating Parameters

USE AND MAINTENANCE MANUAL
ATTILA
39
EN
8.4.6. ADJUSTING OPERATING PARAMETERS
For adjusting the operating parameters of the equipment, via control panel:
STEP ACTION
1
Press the buttons and simultaneously for at least 4 sec. The parameter number appears on the display
(e.g. “P0”).
Note: the equipment must be switched off/in stand-by.
3
Use the buttons and , while the number is displayed, to switch to the next/previous parameter.
4
Press again to change the selected parameter.
Note: to change the parameter, use the buttons and (refer to the table below).
For the parameter list, please refer to “Digital version blast chiller parameters”.