Attila DIGITAL - Automatic Defrost; Adjusting Operating Parameters

ATTILA
EN
46
8.5.10. AUTOMATIC DEFROST
The equipment is equipped with an automatic system for daily defrosting set by the Manufacturer.
Act on the control panel to change the automatic defrosting (number, duration, interval).
Remove the drain plug before defrosting.
8.5.11. ADJUSTING OPERATING PARAMETERS
The equipment has two types of parameters:
▪ Basic, user-oriented parameters
▪ Advanced, password-protected parameters for qualified personnel.
For adjusting the operating parameters of the equipment, via control panel:
STEP ACTION
1
Press and hold the buttons and simultaneously to access the parameter list.
2
Press or and select the parameter to be changed.
3
Press the key to display the current parameter value.
Note: press to cancel the change and return to the previous display.
4
Within 10 seconds, press or to change the parameter value.
5
Press , or wait 10 seconds to confirm the parameter change.
6
Press the button or wait 10 seconds to exit the parameter list.
For the parameter list, please refer to “Touch version blast chiller basic parameters” and
“Touch version blast chiller advanced parameters”.