Attila DIGITAL - Timed Blasting Cycle; Manual Defrost

ATTILA
EN
38
8.4.4. TIMED BLASTING CYCLE
To carry out the timed blasting cycle:
STEP ACTION
1 Press the O/I main switch.
2
Press the button and select the standard temperature +3°C or -18°C.
3
Press the keys and to set the desired time for the blasting cycle.
4
Press to start the cycle.
5
When the cycle is finished (when the buzzer starts to sound), the equipment automatically switches to the storage
phase.
Note: the buzzer can be muted with the button.
6
To interrupt the cycle, press .
8.4.5. MANUAL DEFROST
Defrosting of the equipment is done in manual mode.
To carry out the manual defrosting cycle:
STEP ACTION
1
Perform defrosting with door open or door closed.
Note: In the case of defrosting with the door closed, the time required will be longer.
2 Remove the drain plug (A).
3 When defrosting is complete, empty the condensate drip tray and re-insert the drain plug (A).
2
A