Attila DIGITAL - Installation; Installation Site; Features of the Installation Site

USE AND MAINTENANCE MANUAL
ATTILA
17
EN
5. INSTALLATION
Only qualied technical personnel should perform installation operations on the equipment.
The manufacturer accepts no liability in the event of non-compliance with current safety
regulations.
Do not install and use the equipment in ATEX classied environments, locations or areas.
5.1. INSTALLATION SITE
5.1.1. FEATURES OF THE INSTALLATION SITE
Do not install the equipment outdoors, directly exposed to the weather.
The installation room must be a room with adequate and controlled temperature and humidity in order to avoid malfunctions
and condensation.
Follow the reported permissible environmental conditions:
PERMITTED ENVIRONMENTAL CONDITIONS
Ambient temperature max 30°C
Air humidity max 55%
Do not use the equipment outside the permitted conditions of use and operation.
Do not obstruct the supply and return air ventilation openings in the equipment.
Place the equipment away from heat sources and open ames.