Attila DIGITAL - 10. Maintenance; Routine Maintenance; Inspecting after Delivery

ATTILA
EN
54
10. MAINTENANCE
WARNING
Electrical hazard. Disconnect the power supply before carrying out maintenance work.
Only authorised technical personnel should service the equipment.
10.1. ROUTINE MAINTENANCE
Ensure smooth operation over time of the equipment by performing periodic/preventive checks and maintenance.
10.1.1. INSPECTING AFTER DELIVERY
The following table lists a series of checks and interventions that need to be carried out according to the recommended
frequency.
OPERATION
FREQUENCY
WEEKLY MONTHLY EVERY 6
MONTHS
YEARLY
Check that the door seals and the door itself close properly.
■
Check that there are no cooling fluid leaks and that the
refrigerating system is working properly.
Checking for refrigerating gas leaks
must be carried out by qualied and
authorised personnel in accordance
with local regulations.
■
Check that the maintenance status of the electrical system is
in complete safety.
■
Check that the condensation water drain system works
correctly.
■