Attila DIGITAL - Table of Cleaning Operations; General Cleaning; Cleaning the Condenser; Core Probe Cleaning

To Next Page

To Previous Page

USE AND MAINTENANCE MANUAL

ATTILA

9.2. TABLE OF CLEANING OPERATIONS

The table lists a number of cleaning operations to be performed according to the recommended schedule.

OPERATION

FREQUENCY

WHEN

REQUIRED

DAILY MONTHLY

EVERY 6

MONTHS

YEARLY

Cleaning accessible internal parts

■

Cleaning external surfaces

■

Cleaning the defrosting water collection tray

■

Cleaning the condenser

■ ■

Cleaning the loading area

■

Core probe cleaning

■

Integrity check of seals

■

Check power cable, plugs and/or sockets

■

Compressor oil level check

■

Integrity check of refrigeration system piping

■

Inspection of internal power cables and connections

■

9.3. GENERAL CLEANING

Carry out general cleaning of the equipment using a soft cloth and non-aggressive cleaning products.

9.4. CLEANING THE CONDENSER

Clean the condenser periodically to ensure its proper functioning.

Use an air jet blowing from the inside to the outside of the unit. If this is not possible, use a

long-bristled brush on the outside of the condenser.

Do not use water jets.

9.5. CORE PROBE CLEANING

Wash the core probe with water and disinfectant solution.