USE AND MAINTENANCE MANUAL
ATTILA
3
EN
TABLE OF CONTENTS
TABLE OF CONTENTS ................................. 3
USE AND MAINTENANCE MANUAL ............. 5
1. GENERAL PRELIMINARY INFORMATION ....6
1.1. Purpose of the document.................................... 6
1.2. Supply and preservation ..................................... 6
1.3. Consultation notes ............................................. 6
1.4. Regulatory framework ........................................ 7
1.5. Warranty ........................................................... 7
2. SAFETY WARNINGS ................................8
2.1. Obligations and prohibitions ............................... 9
2.1.1. Obligations .....................................................9
2.1.2. Prohibitions..................................................... 9
3. IDENTIFICATION AND DESCRIPTION .......10
3.1. Equipment identification ................................... 10
3.2. Intended use .................................................... 11
3.3. Description ...................................................... 11
3.4. Main components ............................................ 12
4. RECEIPT AND HANDLING ...................... 13
4.1. Equipment receipt ............................................ 13
4.1.1. Handling with packaging ................................13
4.1.2. Packaging removal and inspection ...................14
4.1.3. Packaging disposal ........................................ 15
4.2. Handling .......................................................... 15
4.2.1. Version and weight division for handling........... 15
4.2.2. Handling operations ....................................... 16
5. INSTALLATION .....................................17
5.1. Installation site ................................................ 17
5.1.1. Features of the installation site .......................17
5.1.2. Minimum safety distances ..............................18
5.2. Positioning and adjustment of feet .................... 19
5.3. Condensate water drain ................................... 19
6. CONNECTIONS ..................................... 20
6.1. Electrical connection ........................................ 20
6.1.1. Power supply connection ................................ 20
7. CONTROL PANEL .................................. 21
7.1. “Digital” version blast chiller interface .............. 21
7.1.1. Alarms ......................................................... 22
7.1.2. Cycle-dependent interface characteristics ........23
7.2. “Touch” version blast chiller interface - EWBC800 . 24
7.2.1. Display ......................................................... 27
7.3. 'ALADINO' version blast chiller interface ........... 29
7.3.1. Display ......................................................... 30
7.3.2. Display - messages .......................................31
8. USE..................................................... 32
8.1. Checks before use ........................................... 32
8.2. Product load to be blasted ................................ 33
8.3. Product blasting ............................................... 34
8.3.1. Temperature measurement ............................. 34
8.3.2. Blasting times ...............................................34
8.4. Use of “Digital” version blast chiller .................. 36
8.4.1. Activation ..................................................... 36
8.4.2. Blasting modes .............................................36
8.4.3. Blasting cycle with core probe ........................37
8.4.4. Timed blasting cycle ...................................... 38
8.4.5. Manual defrost .............................................. 38
8.4.6. Adjusting operating parameters.......................39
8.5. Use of “Touch” version blast chiller ................... 40
8.5.1. Activation ..................................................... 40
8.5.2. Blasting modes .............................................40
8.5.3. Blasting cycle with core probe ........................41
8.5.4. Timed blasting cycle ...................................... 42
8.5.5. Manual storage cycle ..................................... 43
8.5.6. Cell sterilisation cycle (if any) ..........................44
8.5.7. Core probe heating (if fitted) ...........................44
8.5.8. Cell light (if any) ............................................45
8.5.9. Manual defrost .............................................. 45
8.5.10. Automatic defrost .......................................... 46
8.5.11. Adjusting operating parameters....................... 46
8.5.12. Password entry for advanced parameters ......... 47
8.6. Use of 'ALADINO' version blast chiller ............... 48
8.6.1. Activation ..................................................... 48
8.6.2. Operating modes ........................................... 48
8.6.3. Positive cycle (+3°C) / negative (-18°C) / deep
negative (-35°C) ............................................ 49
8.6.4. Infinite negative cycle (-40°C) .........................50
8.6.5. Defrost ......................................................... 50
8.6.6. Adjusting operating parameters.......................51
8.7. Power off/stand-by .......................................... 51
9. CLEANING ........................................... 52
9.1. Cleaning safety warnings ................................. 52
9.2. Table of cleaning operations ............................. 53
9.3. General cleaning .............................................. 53
9.4. Cleaning the condenser .................................... 53
9.5. Core probe cleaning ......................................... 53
To Next Page
Loading...