ATTILA
EN
16
4.2.2. HANDLING OPERATIONS
Carefully read the instructions before moving the equipment.
Only qualied technical personnel should perform handling operations on the equipment.
The manufacturer accepts no liability in the event of non-compliance with current safety
regulations.
Move the equipment while keeping it upright at all times. Do not tilt the equipment.
Lifting/handling must be performed by 2 operators.
Lift the equipment manually, gripping it at the base.
If the equipment is tilted, wait at least 8 hours before starting up. In this way, the oil in the condenser flows to all parts for
lubrication.
CAUTION
When handling, take care not to damage the equipment itself, persons, animals and/or
things in the immediate vicinity.
CAUTION
Do not move the equipment by pulling the door.
To Next Page
Loading...