USE AND MAINTENANCE MANUAL
ATTILA
19
EN
5.2. POSITIONING AND ADJUSTMENT OF FEET
Position the equipment perfectly level, so that it can work properly, the condensation water from the defrosting process can
drain off correctly and there are no noisy vibrations of the motor.
For positioning and adjusting the equipment feet:
STEP ACTION PICTURE
1 Place the equipment on a horizontal plane.
2 Adjust (if necessary) the height of the screw feet.
3 Check the flatness with a spirit level.
4
Check the correct positioning of the condensate water collection tray
and the relevant drain.
5.3. CONDENSATE WATER DRAIN
The equipment has a tray for collecting condensation water. Remove the tray at the end of manual defrosting with the door open.
To Next Page
Loading...