Attila DIGITAL - Blasting Cycle with Core Probe

USE AND MAINTENANCE MANUAL
ATTILA
37
EN
8.4.3. BLASTING CYCLE WITH CORE PROBE
If, when starting a probe blasting, the error “PnS” appears after 5 minutes, reposition
the probe in a more suitable way. Alternatively, the blasting will continue in timed mode.
To carry out the blasting cycle with core probe:
STEP ACTION
1 Press the O/I main switch.
2
Press the button and select the standard temperature +3°C or -18°C.
3
Press to start the cycle.
4
When the cycle is finished (when the buzzer starts to sound), the equipment automatically switches to the storage
phase.
Note: the buzzer can be muted with the button.
5
To interrupt the cycle, press .